Free Access to the whole issue

Mechanics & Industry

Volume 21 / No 5 (2020)

Export the citation of the selected articles Export
Select all

Scientific challenges and industrial applications in mechanical engineering

Open Access

Digital twin by DEM for ball bearing operating under EHD conditions 506

Samatar Omar Farah, Mohamed Guessasma and Emmanuel Bellenger

Published online: 10 August 2020

DOI: https://doi.org/10.1051/meca/2020022

Open Access

Contact modelling of highly heterogeneous friction material for braking applications 507

Essosnam Arfa, Vincent Magnier, Philippe Dufrénoy and Géry de Saxcé

Published online: 10 August 2020

DOI: https://doi.org/10.1051/meca/2020031

Open Access

Implementation of a reaction-diffusion process in the Abaqus finite element software 508

Elisabeth Vasikaran, Yann Charles and Pierre Gilormini

Published online: 10 August 2020

DOI: https://doi.org/10.1051/meca/2020010

Open Access

Identification of the pore size distribution of a porous medium by yield stress fluids using Herschel-Bulkley model 509

Aimad Oukhlef, Abdelhak Ambari and Stéphane Champmartin

Published online: 10 August 2020

DOI: https://doi.org/10.1051/meca/2020032

Open Access

Design and control of a low-cost autonomous profiling float 512

Thomas Le Mézo, Gilles Le Maillot, Thierry Ropert, Luc Jaulin, Aurélien Ponte and Benoît Zerr

Published online: 11 August 2020

DOI: https://doi.org/10.1051/meca/2020037

Open Access

Fast simulation of grain growth based on Orientated Tessellation Updating Method 513

Daniel Weisz-Patrault, Sofia Sakout and Alain Ehrlacher

Published online: 11 August 2020

DOI: https://doi.org/10.1051/meca/2020041

Open Access

Seismic vulnerability of structures: application to the Civil Protection building in Andorra 514

Matthias Barus, Olivier Dalverny, Hélène Welemane, Jean-Pierre Faye and Carmen Martin

Published online: 11 August 2020

DOI: https://doi.org/10.1051/meca/2020045

Open Access

Discharge flow of granular media from rectangular silos: role of an obstacle and modelling by an orifice at the corner 516

Samira Laidaoui, Pascale Aussillous, Mohammed Djermane and Blanche Dalloz-Dubrujeaud

Published online: 13 August 2020

DOI: https://doi.org/10.1051/meca/2020048

Open Access

Particle-laden flow around an obstacle in a square pipe: experiments and modeling 517

Ouardia Ait Oucheggou, Véronique Pointeau, Guillaume Ricciardi, Élisabeth Guazzelli and Laurence Bergougnoux

Published online: 13 August 2020

DOI: https://doi.org/10.1051/meca/2020063

Open Access

Influence of the material microstructural properties on a 3-point bending test 518

Ahmed Maati, Laurent Tabourot, Pascale Balland and Salim Belaid

Published online: 13 August 2020

DOI: https://doi.org/10.1051/meca/2020060

Open Access

Steady-state heat transfer in microcracked media 519

Sharan Raj Rangasamy Mahendren, Hélène Welemane, Olivier Dalverny and Amèvi Tongne

Published online: 14 August 2020

DOI: https://doi.org/10.1051/meca/2020034

Open Access

Studying of parameters of two-phase displacement in porous media with MRI technique 524

Jamal Fannir, Irina Panfilova, Sébastien Leclerc and Didier Stemmelen

Published online: 25 August 2020

DOI: https://doi.org/10.1051/meca/2020058

Open Access

Optimization of transversal flow stress and strain and weld seam microstructure analysis in butt-HDPE friction stir welded plates 501

Khaled Hamrouni, Mohamed-Ali Rezgui, Ali Trabelsi, Zoltan Kiss and Rachid Nasri

Published online: 09 July 2020

DOI: https://doi.org/10.1051/meca/2020047

Open Access

Mixed H₂/H_∞ guaranteed cost control for high speed elevator active guide shoe with parametric uncertainties 502

Chen Chen, Ruijun Zhang, Qing Zhang and Lixin Liu

Published online: 13 July 2020

DOI: https://doi.org/10.1051/meca/2020044

Open Access

Effects of process parameters on tensile strength of friction stir welded Al-Cu double-layer sheets 503

Mohammad Taghizadeh Tabrizi, Amirhossein Jabbari Mostahsan and Mohammad Sedighi

Published online: 24 July 2020

DOI: https://doi.org/10.1051/meca/2020059

Open Access

The effect of NCG on the characteristics of hydraulic cavitation 504

Qiang Li, Wei Li, Jian Zhang, Dezhi Ming, Weiwei Xu and Zhenbo Wang

Published online: 24 July 2020

DOI: https://doi.org/10.1051/meca/2020057

Open Access

Comparative study of the effective parameters on residual stress relaxation in welded aluminum plates under cyclic loading 505

Yousef Ghaderi Dehkordi, Ali Pourkamali Anaraki and Amir Reza Shahani

Published online: 05 August 2020

DOI: https://doi.org/10.1051/meca/2020061

Open Access

Contact pressure in misaligned spline couplings 510

Clément Dupertuis and Jean-Louis Ligier

Published online: 10 August 2020

DOI: https://doi.org/10.1051/meca/2020049

Open Access

Design and anylysis of gamma type Stirling engine 511

Davood Jalali Vahid and Hojjat Danandeh Oskouei

Published online: 10 August 2020

DOI: https://doi.org/10.1051/meca/2020062

Open Access

Effect of bipropellant combustion products on the rocket nozzle design 515

Omar Abada, Abderahim Abada and Ahmed Abdallah El-Hirtsi

Published online: 13 August 2020

DOI: https://doi.org/10.1051/meca/2020064

Open Access

Prediction models for on-line cutting tool and machined surface condition monitoring during hard turning considering vibration signal 520

Amlana Panda, Ashok Kumar Sahoo, Isham Panigrahi and Arun Kumar Rout

Published online: 17 August 2020

DOI: https://doi.org/10.1051/meca/2020067

Open Access

Experimental investigations of vibration and acoustics signals in milling process using kapok oil as cutting fluid 521

Subramaniam Shankar, Murugasamy Manikandan, Gunasekaran Raja and Alokesh Pramanik

Published online: 17 August 2020

DOI: https://doi.org/10.1051/meca/2020066

Open Access

Analysis of torsional vibration effect on the diesel engine block vibration 522

Shiwei Ni, Yibin Guo, Binglin Lv, Donghua Wang, Wanyou Li and Zhijun Shuai

Published online: 18 August 2020

DOI: https://doi.org/10.1051/meca/2020065

Open Access

An investigation of cutting parameters effect on sound level, surface roughness, and power consumption during machining of hardened AISI 4140 523

Abidin Şahinoğlu and Efehan Ulas

Published online: 20 August 2020

DOI: https://doi.org/10.1051/meca/2020068

Open Access

Influence of snake rolling on metal flow in hot rolling of aluminum alloy thick plate 525

Pujun Hao and Jingna Liu

Published online: 31 August 2020

DOI: https://doi.org/10.1051/meca/2020071

Open Access

Editorial

A posthumous tribute to Professor Gérard Lallement (1936–2019) 526

Jean Piranda

Published online: 01 September 2020

DOI: https://doi.org/10.1051/meca/2020069

Open Access

An inverse analysis to identify the Johnson-Cook constitutive model parameters for cold wire drawing process 527

Ashkan Mahmoud Aghdami and Behnam Davoodi

Published online: 03 September 2020

DOI: https://doi.org/10.1051/meca/2020070

Open Access

Hydroacoustic modelling applied in hydraulic components: a test rig based experiment 528

Arnaud Maillard, Éric Noppe, Benoît Eynard and Xavier Carniel

Published online: 03 September 2020

DOI: https://doi.org/10.1051/meca/2020055

Open Access

Electrically-assisted mechanical clinching of AA6061-T6 aluminum to galvanized DP590 steel: effect of geometrical features on material flow and mechanical strength 529

Abozar Barimani-Varandi and Abdolhossein Jalali Aghchai

Published online: 18 September 2020

DOI: https://doi.org/10.1051/meca/2020072

Mechanics & Industry

Volume 21 / No 5 (2020)

Scientific challenges and industrial applications in mechanical engineering

Digital twin by DEM for ball bearing operating under EHD conditions 506

Contact modelling of highly heterogeneous friction material for braking applications 507

Implementation of a reaction-diffusion process in the Abaqus finite element software 508

Identification of the pore size distribution of a porous medium by yield stress fluids using Herschel-Bulkley model 509

Design and control of a low-cost autonomous profiling float 512

Fast simulation of grain growth based on Orientated Tessellation Updating Method 513

Seismic vulnerability of structures: application to the Civil Protection building in Andorra 514

Discharge flow of granular media from rectangular silos: role of an obstacle and modelling by an orifice at the corner 516

Particle-laden flow around an obstacle in a square pipe: experiments and modeling 517

Influence of the material microstructural properties on a 3-point bending test 518

Steady-state heat transfer in microcracked media 519

Studying of parameters of two-phase displacement in porous media with MRI technique 524

Optimization of transversal flow stress and strain and weld seam microstructure analysis in butt-HDPE friction stir welded plates 501

Mixed H2/H∞ guaranteed cost control for high speed elevator active guide shoe with parametric uncertainties 502

Effects of process parameters on tensile strength of friction stir welded Al-Cu double-layer sheets 503

The effect of NCG on the characteristics of hydraulic cavitation 504

Comparative study of the effective parameters on residual stress relaxation in welded aluminum plates under cyclic loading 505

Contact pressure in misaligned spline couplings 510

Design and anylysis of gamma type Stirling engine 511

Effect of bipropellant combustion products on the rocket nozzle design 515

Prediction models for on-line cutting tool and machined surface condition monitoring during hard turning considering vibration signal 520

Experimental investigations of vibration and acoustics signals in milling process using kapok oil as cutting fluid 521

Analysis of torsional vibration effect on the diesel engine block vibration 522

An investigation of cutting parameters effect on sound level, surface roughness, and power consumption during machining of hardened AISI 4140 523

Influence of snake rolling on metal flow in hot rolling of aluminum alloy thick plate 525

A posthumous tribute to Professor Gérard Lallement (1936–2019) 526

An inverse analysis to identify the Johnson-Cook constitutive model parameters for cold wire drawing process 527

Hydroacoustic modelling applied in hydraulic components: a test rig based experiment 528

Electrically-assisted mechanical clinching of AA6061-T6 aluminum to galvanized DP590 steel: effect of geometrical features on material flow and mechanical strength 529

Mixed H₂/H_∞ guaranteed cost control for high speed elevator active guide shoe with parametric uncertainties 502