Open Access
Mechanics & Industry
Volume 21, Number 6, 2020
Article Number 618
Number of page(s) 15
Published online 15 December 2020
  1. J. Sun, Y.S. Wang, F.K. Wu, G.Q. Tang, L.L. Wang, Y.H. Wang, Y. Yang, Vertical characteristics of VOCs in the lower troposphere over the North China Plain during pollution periods, Environ. Pollut. 236 , 907–915 (2018) [CrossRef] [Google Scholar]
  2. R.J. Zhang, M.X. Wang, X.Y. Zhang, G.H. Zhu, Analysis on the chemical and physical properties of particles in a dust storm in spring in Beijing, Powder Technol. 137 , 77–82 (2003) [CrossRef] [Google Scholar]
  3. X.G. Cheng, B. Yang, G.Q. Liu, T. Olofsson, H.B. Li, A total bounded variation approach to low visibility estimation on expressways, Sensors 18 , 18 (2018) [Google Scholar]
  4. G.-l. Liu, W.-b. Huang, P.-w. Chen, S.-h. Xue, Research on fog and haze purification technology for highways, J. Highw. Transp. Res. Dev., Engl. Ed. (USA) 10 , 102–110 (2016) [Google Scholar]
  5. C.J. Liu, C.Y. Liu, N.T. Mong, C.C.K. Chou, Spatial correlation of satellite-derived PM2.5 with hospital admissions for respiratory diseases, Remote Sens. 8 , 15 (2016) [Google Scholar]
  6. J. Vempilly, B. Abejie, V. Diep, M. Gushiken, M. Rawat, T.R. Tyner, The synergetic effect of ambient PM2.5 exposure and rhinovirus infection in airway dysfunction in asthma: A pilot observational study from the central valley of california, Exp. Lung Res. 39 , 434–440 (2013) [CrossRef] [Google Scholar]
  7. Y. Chen, G.W.K. Wong, J. Li, Environmental exposure and genetic predisposition as risk factors for asthma in China, Allergy Asthma Immunol. Res. 8 , 92–100 (2016) [CrossRef] [PubMed] [Google Scholar]
  8. W.L. Zijlema, K. Wolf, R. Emeny, K.H. Ladwig, A. Peters, H. Kongsgard, K. Hveem, K. Kvaloy, T. Yli-Tuomi, T. Partonen, T. Lanki, M. Eeftens, K. de Hoogh, B. Brunekreef, R.P. Stolk, J.G.M. Rosmalen, The association of air pollution and depressed mood in 70, 928 individuals from four European cohorts, Int. J. Hyg. Environ. Health. 219 , 212–219 (2016) [CrossRef] [PubMed] [Google Scholar]
  9. Q. Wang, Z.M. Yang, Does chronic disease influence susceptibility to the effects of air pollution on depressive symptoms in China?, Int. J. Ment. Health Syst. 12 , 12 (2018) [CrossRef] [Google Scholar]
  10. Y.S. Song, X.K. Wang, B.A. Maher, F. Li, C.Q. Xu, X.S. Liu, X. Sun, Z.Y. Zhang, The spatial-temporal characteristics and health impacts of ambient fine particulate matter in China, J. Clean Prod. 112 , 1312–1318 (2016) [CrossRef] [Google Scholar]
  11. C.I. Falcon-Rodriguez, A.R. Osornio-Vargas, I. Sada-Ovalle, P. Segura-Medina, Aeroparticles, Composition, and Lung Diseases, Front. Immunol. 7 , 9 (2016) [CrossRef] [PubMed] [Google Scholar]
  12. X.B. Deng, F. Zhang, L.J. Wang, W. Rui, F. Long, Y. Zhao, D.L. Chen, W.J. Ding, Airborne fine particulate matter induces multiple cell death pathways in human lung epithelial cells, Apoptosis 19 , 1099–1112 (2014) [CrossRef] [PubMed] [Google Scholar]
  13. S. Walter, S. Ulli-Beer, A. Wokaun, Assessing customer preferences for hydrogen-powered street sweepers: a choice experiment, Int. J. Hydrog. Energy 37 , 12003–12014 (2012) [CrossRef] [Google Scholar]
  14. A. Karanasiou, F. Amato, T. Moreno, J. Lumbreras, R. Borge, C. Linares, E. Boldo, A. Alastuey, X. Querol, Road dust emission sources and assessment of street washing effect, Aerosol Air Qual. Res. 14 , 734–743 (2014) [CrossRef] [Google Scholar]
  15. J. Vaze, F.H.S. Chiew, Experimental study of pollutant accumulation on an urban road surface, Urban Water 4 , 379–389 (2000) [CrossRef] [Google Scholar]
  16. Z.J. Chen, W.U. Xiao-Yuan, X.U. Guang-Pu, A.Q. Wang, Experimental study on suction mouth of vacuum sweeper, J. Tongji Univ. 12, 1483–1485 (2001) [Google Scholar]
  17. Y. Xu, X.-f. Li, T.-y. Xiao, G.-y. Zeng, Research on applications of computational dynamic fluid in the simulation analysis of highway mechanical sweeper, J. Syst. Simul. 16 , 270–273 (2004) [Google Scholar]
  18. Y. Zeng, T. Xiao, X. Li, Y. Xu, Simulation for the design and optimization of dust collection box of highway sweeper, Comput. Simul. 21 , 157 (2004) [Google Scholar]
  19. C.-z. Yang, Y.-c. Zhang, Z.-j. Ouyang, J. Zhang, S.-z. Yang, R.-z. Zhang, Parametric design of dust collection port of vacuum sweeper based on flow simulation, J. Cent. South Univ. Sci. Technol. 43 , 3704–3709 (2012) [Google Scholar]
  20. G.-y. Zeng, X.-f. Li, T.-y. Xiao, Y. Xu, Simulation for the design of dust suction system of highway sweeper, J. Syst. Simul. 16 , 2770–2773 (2004) [Google Scholar]
  21. Y.C. Zhang, C.Z. Yang, C. Baker, M. Chen, X. Zou, W.L. Dai, Effects of expanding zone parameters of vacuum dust suction mouth on flow simulation results, J. Cent. South Univ. 21 , 2547–2552 (2014) [CrossRef] [Google Scholar]
  22. B. Wu, J. Men, J. Chen, Numerical study on particle removal performance of pickup head for a street vacuum sweeper, Powder Technol. 200 , 16–24 (2010) [CrossRef] [Google Scholar]
  23. Y. Xi, Y. Dai, X.l. Zhang, X. Zhang, Prediction of particle-collection efficiency for vacuum-blowing cleaning system based on operational conditions, Processes 8 , 809 (2020) [CrossRef] [Google Scholar]
  24. D.M. Murphy, M. Parker, N.P. Sullivan, The interplay of heat transfer and endothermic chemistry within a ceramic microchannel reactor, J. Therm. Sci. Eng. Appl. 6 , 7 (2014) [CrossRef] [Google Scholar]
  25. G.D. Wehinger, F. Klippel, M. Kraume, Modeling pore processes for particle-resolved CFD simulations of catalytic fixed-bed reactors, Comput. Chem. Eng. 101 , 11–22 (2017) [CrossRef] [Google Scholar]
  26. B. Wu, I. Men, I. Chen, Improving the design of a pickup head for particle removal using computational fluid dynamics, Proc. Inst. Mech. Eng. Part C-J. Eng. Mech. Eng. Sci. 225 , 939–948 (2011) [CrossRef] [Google Scholar]
  27. E.F. Barrera, F.A. Aguirre, S. Vargas, E.D. Martínez, Influencia del Y Plus en el Valor del Esfuerzo Cortante de Pared a través Simulaciones empleando Dinámica Computacional de Fluidos, Inf. Tecnol. 29 , 291–302 (2018) [CrossRef] [Google Scholar]
  28. X.L. Zhang, Y.L. Zhang, Z.M. Liu, J. Liu, Analysis of heat transfer and flow characteristics in typical cambered ducts, Int. J. Therm. Sci. 150 , 14 (2020) [CrossRef] [Google Scholar]
  29. B.F. Wu, J.L. Men, J. Chen, Numerical investigation of dusts removal from tramway surface by street vacuum sweeper, in: Z. Cao, Y.H. He, L. Sun, X.Q. Cao (Eds.), Application of Chemical Engineering, Pts 1-3 Trans Tech Publications Ltd., Durnten- Zurich, 2011, pp. 1619–1622 [Google Scholar]
  30. J.R. Berg, H.M. Soliman, S.J. Ormiston, Effective cooling of stacked heat-generating bodies in a large room: Comparison between floor and side-wall air injection, Int. J. Therm. Sci. 47 , 787–799 (2008) [CrossRef] [Google Scholar]
  31. F. Han, E. Ganju, R. Salgado, M. Prezzi, Effects of interface roughness, particle geometry, and gradation on the sand-steel interface friction angle, J. Geotech. Geoenviron. Eng. 144 , 12 (2018) [Google Scholar]
  32. F.L. Zhu, G.Z. Zhang, J. Chen, Flow field analysis and structure optimization of vacuum sweeper suction mouth, Mach. Des. Manuf. 11, 50–52 (2008) [Google Scholar]
  33. T.G. Chuah, J. Gimbun, T.S.Y. Choong, A CFD study of the effect of cone dimensions on sampling aerocyclones performance and hydrodynamics, Powder Technol. 162 , 126–132 (2006) [CrossRef] [Google Scholar]
  34. M. Jain, M.R. Paranandi, D. Roush, K. Goklen, W.J. Kelly, Using CFD to understand how flow patterns affect retention of cell-sized particles in a tubular bowl centrifuge, Ind. Eng. Chem. Res. 44 , 7876–7884 (2005) [CrossRef] [Google Scholar]
  35. G. Genin, J.L. Houzelot, A. Kotro, G. Martin, New methods for measurement of residence time distributions of transported solid particles, Chem. Eng. J. 81 , 301–306 (2001) [CrossRef] [Google Scholar]
  36. H. Zhao, J. Li, Q.S. Zhu, H.Z. Li, Modulating the mean residence time difference of wide-size particles in a fluidized bed, Chin. J. Chem. Eng. 26 , 238–244 (2018) [CrossRef] [Google Scholar]
  37. B.B. Yang, K.R. Swartzel, Particle residence time distributions in 2-phase flow in straight round conduit, J. Food Sci. 57 , 497–502 (1992) [CrossRef] [Google Scholar]
  38. K. Fang, F.J. Hickernell, The uniform design and its applications, Hong Kong Baptist University, Department of Mathematics, 1995 [Google Scholar]
  39. Z. Xu, T. Dong, J. Kang, X. Zhao, H. Wang, G. Li, Parameters optimizing of NiCr-Cr3C2 coating deposited by supersonic plasma spraying based on uniform design, J. Mech. Eng. (China) 50 , 43–49 (2014) [Google Scholar]
  40. H.L. Ping, G.H. Xu, S.F. Wu, System optimization of cyclohexane dehydrogenation under multiphase reaction conditions using the uniform design method, Int. J. Hydrog. Energy 40 , 15923–15932 (2015) [CrossRef] [Google Scholar]
  41. J. Yang, L. Li, L.Y. Yang, J.Q. Li, Uniform design for the parameters optimization of pin-fins channel heat sink, Appl. Therm. Eng. 120 , 289–297 (2017) [CrossRef] [Google Scholar]
  42. F. Kaitai, Uniform design and uniform design table, Science Publication, 1994 [Google Scholar]
  43. J.B. Sim, U.H. Yeo, G.H. Jung, S.B. Park, G.N. Bae, S.J. Yook, Enhancement of louver dust collector efficiency using modified dust container, Powder Technol. 325 , 69–77 (2018) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.