Open Access
Issue |
Mechanics & Industry
Volume 22, 2021
|
|
---|---|---|
Article Number | 20 | |
Number of page(s) | 12 | |
DOI | https://doi.org/10.1051/meca/2021021 | |
Published online | 30 March 2021 |
- C.Q. Liu, H. Makino, X.J. Cao, Cam mechanism design, China Machine Press, Beijing, 1997 (in Chinese) [Google Scholar]
- M. Liang, N. Shi, Gear-5-bar combination mechanism's kinematics characteristic simulation, Journal of Xi'an University of Science and Technology 6 , 727–730+764 (2013) (in Chinese) [Google Scholar]
- Y.H. Wei, The design of cam-linkage combined mechanisms design for the given locus, Journal of Shaanxi University of Science and Technology 4 , 68–71 (2012) (in Chinese) [Google Scholar]
- E. Ottaviano, D. Mundo, G.A. Danieli et al., Numerical and experimental analysis of non-circular gears and cam-follower systems as function generators, Mechanism & Machine Theory 43 , 996–1008 (2008) [Google Scholar]
- H.J. Zou, Q. Zhang, X.W. Wang, Basic characteristic and design method of the composite-mechanism, Machine Design & Research 22 , 16–19 (2006) [Google Scholar]
- C. Lin, H. Gong, N. Nie et al., Geometry design, three-dimensional modeling and kinematic analysis of orthogonal fluctuating gear ratio face gear drive, Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science 227 , 779–793 (2013) [Google Scholar]
- C. Lin, L. Zhang, Z.H. Zhang, Transmission theory and tooth surface solution of a new type of non-circular bevel gears, Journal of Mechanical Engineering 50 , 66–75 (2014) [Google Scholar]
- C. Lin, Y. Liu, Characteristic analysis and application of composite motion curve-face gear pair, Journal of the Brazilian Society of Mechanical Sciences & Engineering 38 , 1797–1804 (2016) [Google Scholar]
- F.L. Litvin, J.C. Wang, R.B. Bossler et al., Application of face-gear drives in helicopter transmissions, Journal of Mechanical Design 116 , 672–676 (1994) [Google Scholar]
- F.L. Litvin, A. Fuentes, C. Zanzi et al., Design, generation, and stress analysis of two versions of geometry of face-gear drives, Mechanism & Machine Theory 37 , 1179–1211 (2002) [Google Scholar]
- F.L. Litvin, I. Gonzalez-Perez, A. Fuentes et al., Design, generation and stress analysis of face-gear drive with helical pinion, Computer Methods in Applied Mechanics and Engineering 194 , 3870–3901 (2005) [Google Scholar]
- C. Lin, Y.Q. Yu, Y.N. Hu, Analysis of composite motion law and force of high speed curve-face gear, Journal of Advanced Mechanical Design Systems and Manufacturing 11 , 0070 (2017) [Google Scholar]
- G. Lewis, F. Monasa, Large deflections of cantilever beams of non-linear materials of the Ludwick type subjected to an end moment, International Journal of Non-Linear Mechanics 17 , 1–6 (1982) [Google Scholar]
- J.D. Andrews, A finite-element analysis of bending stresses induced in external and internal involutes spur gears, Journal of Strain Analysis for Engineering Design 26 , 153–163 (1991) [Google Scholar]
- M.A. Hotait, A. Kahraman, T. Nishino, An investigation of root stresses of hypoid gears with misalignments, Journal of Mechanical Design 133 , 071006 (2011) [Google Scholar]
- M.A. Hotait, A. Kahraman, Experiments on the relationship between the dynamic transmission error and the dynamic stress factor of spur gear pairs, Mechanism & Machine Theory 70 , 116–128 (2013) [Google Scholar]
- J.W. Ming, A new photoelastic investigation of the dynamic bending stress of spur gears, Journal of Mechanical Design 125 , 365–371 (2003) [Google Scholar]
- Z. Chen, M. Zeng, A. Fuentes-Aznar, Geometric design, meshing simulation, and stress analysis of pure rolling rack and pinion mechanisms, Journal of Mechanical Design 142 , 1–24 (2019) [Google Scholar]
- T. Nieszporek, R. Gobski, L. Oo, Analysis of the worm wheel toothing accuracy, Tehnicki Vjesnik 24 , 993–1000 (2017) [Google Scholar]
- M. Kowalik, M. Rucki, P. Paszta et al., Plastic deformations of measured object surface in contact with undeformable surface of measuring tool, Measurement Science Review 16 , 254–259 (2016) [Google Scholar]
- R. Gobski, E. Ivandi, Analysis of modification of spur gear profile, Tehnicki Vjesnik 25 , 643–648 (2018) [Google Scholar]
- R. Gobski, Parametric programming of CNC machine tool, Matec Web of Conferences 94 , 07004 (2017) [EDP Sciences] [Google Scholar]
- R. Gobski, A. Szarek, Diagnosis of the operational gear wheel wear, Tehnicki Vjesnik-Technical Gazette 26 , 658–661 (2019) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.