EDP Sciences logo
Submit your paper
Search
Menu
All issues Volume 24 (2023) Mechanics & Industry, 24 (2023) 15 References
Open Access
Issue
Mechanics & Industry
Volume 24, 2023
Article Number 15
Number of page(s) 8
DOI https://doi.org/10.1051/meca/2023014
Published online 03 May 2023
  1. G.G. Meyer, K. Främling, J. Holmström, Intelligent products: a survey, Comput. Ind. 60, 137–148 (2009) [CrossRef] [Google Scholar]
  2. S.A. Rijsdijk, E.J. Hultink, How today's consumers perceive tomorrow's smart products, J. Prod. Innov. Manag. 26, 24–42 (2009) [CrossRef] [Google Scholar]
  3. M.E. Porter, J.E. Heppelmann, How smart, connected products are transforming companies, Harv. Bus. Rev. (2015). Available: https://hbr.org/2015/10/how-smart-connected-products-are-transforming-companies (accessed 22 July 2020) [Google Scholar]
  4. E.S. Gorkunov, S.M. Zadvorkin, S.V. Smirnov, S. Yu. Mitropol'skaya, D.I. Vichuzhanin, Correlation between the stress-strain state parameters and magnetic characteristics of carbon steels, Phys. Met. Metallogr. 103, 311–316 (2007) [CrossRef] [Google Scholar]
  5. T. Ricart, P. Robert, S. Basrour, N. Beraud, M. Museau, H. Paris, Method for determining a deformation of an area of a part obtained by additive manufacturing, WO/2023/281201 (2023). Available: https://www.sumobrain.com/patents/wipo/Method-determining-deformation-area-part/WO2023281201A1.html [Google Scholar]
  6. S.W. Williams, F. Martina, A.C. Addison, J. Ding, G. Pardal, P. Colegrove, Wire + arc additive manufacturing, Mater. Sci. Technol. 32, 641–647 (2016) [CrossRef] [Google Scholar]
  7. B. Vayre, F. Vignat, F. Villeneuve, Metallic additive manufacturing: state-of-the-art review and prospects, Mech. Ind. 13, 89–96 (2012) [CrossRef] [EDP Sciences] [Google Scholar]
  8. K.E.K. Vimal, M. Naveen Srinivas, S. Rajak, Wire arc additive manufacturing of aluminium alloys: a review, Mater. Today: Proc. (2020) [Google Scholar]
  9. F.R. Teixeira, F.M. Scotti, R.P. Reis, A. Scotti, Effect of the CMT advanced process combined with an active cooling technique on macro and microstructural aspects of aluminum WAAM, Rapid Prototyp. J. 27, 1206–1219 (2021) [CrossRef] [Google Scholar]
  10. R. Li, H. Zhang, F. Dai, C. Huang, G. Wang, End lateral extension path strategy for intersection in wire and arc additive manufactured 2319 aluminum alloy, Rapid Prototyp. J. 26, 360–369 (2019) [CrossRef] [MathSciNet] [Google Scholar]
  11. N. Béraud, A. Chergui, M. Limousin, F. Villeneuve, F. Vignat, An indicator of porosity through simulation of melt pool volume in aluminum wire arc additive manufacturing, Mech. Ind. 23, 1 (2022) [CrossRef] [EDP Sciences] [Google Scholar]
  12. P. Wang, X. Chen, Q. Pan, B. Madigan, J. Long, Laser welding dissimilar materials of aluminum to steel: an overview, Int. J. Adv. Manuf. Technol. 87, 3081–3090 (2016) [CrossRef] [Google Scholar]
  13. J. Lin, N. Ma, Y. Lei, H. Murakawa, Shear strength of CMT brazed lap joints between aluminum and zinc-coated steel, J. Mater. Process. Technol. 213, 1303–1310 (2013) [CrossRef] [Google Scholar]
  14. A. Chabenat, Montage des pièces pour soudage à l'arc électrique, Techniques de l'ingénieur, Mécanique − Travail des matériaux, Assemblage, p. 14, 2000 [Google Scholar]
  15. P. Young, How to Weld Thin Metal − Welding Headquarters, weldingheadquarters. com (2020). Available from https://weldingheadquarters.com/how-to-weld-thin-metal/ (accessed 18 January 2022) [Google Scholar]
  16. K. Furukawa, New CMT arc welding process − welding of steel to aluminium dissimilar metals and welding of super-thin aluminium sheets, Weld. Int. 20, 440–445 (2006) [CrossRef] [Google Scholar]
  17. L. Agudo et al., Intermetallic FexAly-phases in a steel/Al-alloy fusion weld, J. Mater. Sci. 42, 4205–4214 (2007) [CrossRef] [Google Scholar]
  18. J. Singh, K.S. Arora, D.K. Shukla, Dissimilar MIG-CMT weld-brazing of aluminium to steel: a review, J. Alloys Compd. 783, 753–764 (2019) [CrossRef] [Google Scholar]
  19. L.A. Jácome et al., Influence of filler composition on the microstructure and mechanical properties of steel—aluminum joints produced by metal arc joining, Adv. Eng. Mater. 11, 350–358 (2009) [CrossRef] [Google Scholar]
  20. Y. Shi, L. Shao, J. Huang, Y. Gu, Effects of Si and Mg elements on the microstructure of aluminum-steel joints produced by pulsed DE-GMA welding-brazing, Mater. Sci. Technol. 29, 1118–1124 (2013) [CrossRef] [Google Scholar]
  21. R. Cao, G. Yu, J.H. Chen, P.-C. Wang, Cold metal transfer joining aluminum alloys-to-galvanized mild steel, J. Mater. Process. Technol. 10, 1753–1763 (2013) [CrossRef] [Google Scholar]
  22. B. Cong, J. Ding, S. Williams, Effect of arc mode in cold metal transfer process on porosity of additively manufactured Al-6.3%Cu alloy, Int. J. Adv. Manuf. Technol. 76, 1593–1606 (2015) [CrossRef] [Google Scholar]
  23. Fronius, CMT Pulse Advanced for joining high-strength steels, fronius.com (2020). Available from https://www.fronius.com/en-gb/uk/welding-technology/world-of-welding/fronius-welding-processes/cmt-pulse-advanced (accessed 26 August 2022) [Google Scholar]
  24. P. Robert, M. Museau, H. Paris, Effect of temperature on the quality of welding beads deposited with CMT technology, in 2018 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) (2018), pp. 680–684 [CrossRef] [Google Scholar]
  25. T. Kumar, D.V. Kiran, N. Arora, P.S. Kumar, Study of steel-aluminium joining under the influence of current waveforms using advanced CMT process variants, Mater. Manuf. 0, 1–18 (2022) [Google Scholar]
  26. C. Thiery, Tomographie à rayons X, Techniques de l'ingénieur, Mesures − Analyses | Techniques d'analyse (2015). Available: https://www.techniques-ingenieur.fr/doi/10.51257/a/v3/p950 (accessed 03 Jaunary 2022) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.