Open Access
Mechanics & Industry
Volume 20, Number 6, 2019
Article Number 625
Number of page(s) 8
Published online 29 November 2019
  1. F. Bogard, S. Murer, K. Debray, Y. Ning, B. Bartkowiak, FE optimization of the ejection force of a spring-maintained connector, Mech. Ind. 17, 605 (2016) [CrossRef] [Google Scholar]
  2. L. Dabrowski, M. Wasilczuk, Influence of hydrostatic pump operation period on performance of a thrust bearing of a 125 MW pump-turbine, Mech. Ind. 5, 3–9 (2004) [Google Scholar]
  3. C. Gosselin, Adaptive robotic mechanical systems: a design paradigm, ASME J. Mech. Des. 128, 192–198 (2006) [CrossRef] [Google Scholar]
  4. W.S. Rone, W. Saab, P. Ben-Tzvi, Design, modeling, and integration of a flexible universal spatial robotic tail, ASME J. Mech. Robot. 10, 041001 (2018) [CrossRef] [Google Scholar]
  5. Z.W. Yang, C-C. Lan, An adjustable gravity-balancing mechanism using planar extension and compression springs, Mech. Mach. Theory 92, 314–329 (2015) [Google Scholar]
  6. J. Lopez-Martinez, D. Garcia-Vallejo, F-M. Arrabal-Campos, J-M. Garcia-Manrique, Design of three new cam-based constant-force mechanisms, ASME J. Mech. Des. 140, 082302 (2018) [CrossRef] [Google Scholar]
  7. A. Martini, M. Troncossi, M. Carricato, A. Rivola, Static balancing of a parallel kinematics machine with linear-delta architecture, ASME 12th Biennial Conference on Engineering Systems Design and Analysis, Paper No. ESDA2014-20449, 2014, pp. V003T17A010 [CrossRef] [Google Scholar]
  8. R. Barents, M. Schenk, W.D. van Dorsser, B.M. Wisse, J.L. Herder, Spring-to-spring balancing as energy-free adjustment method in gravity equilibrators, ASME J. Mech. Des. 133, 061010 (2011) [CrossRef] [Google Scholar]
  9. D. Piovesan, P. Alladi, Analysis of an energy saving ratchet-based ankle exoskeleton, ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Paper No. DETC2016-60137, 2016, pp. V003T11A012 [Google Scholar]
  10. C.-H. Yeow, A.T. Baisch, S.G. Talbot, C.J. Walsh, Cable-driven finger exercise device with extension return springs for recreating standard therapy exercises, ASME J. Med. Dev. 8, 014502 (2014) [CrossRef] [Google Scholar]
  11. K. Olesnavage, A. Winter, Design and preliminary testing of a prototype for evaluating lower leg trajectory error as an optimization metric for prosthetic feet, ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Paper No. DETC2016-60565, 2016, pp. V05AT07A038 [Google Scholar]
  12. Spring Manufacturers Institute, Inc., 2001 Midwest Road, Suite 106, Oak Brook, Illinois 60523-1335 USA, [Google Scholar]
  13. The Institute of Spring Technology, Henry Street, Sheffield. S3 7EQ, United Kingdom, [Google Scholar]
  14. Spring-I-pediA, [Google Scholar]
  15. A.M. Wahl, Mechanical Springs, McGraw-Hill Book Company, New York, 1963 [Google Scholar]
  16. A. Shirurkar, Y. Patil, D.D. Jebaseelan, Reliability improvement of fork biasing spring in MCCB mechanism, Int. J. Syst. Assur. Eng. Manag. (2018). [Google Scholar]
  17. J.V. Gluck, Fatigue of small helical extension springs subjected to static torsion and alternating lateral deflection, J. Eng. Mater. Technol. 104, 180–185 (1982) [Google Scholar]
  18. E. Rodriguez, M. Paredes, M. Sartor, Optimisation methods for compression, extension and torsion spring design, in International Conference IDMME, Bath, 2004 [Google Scholar]
  19. M. Shimoseki, T. Hamano, T. Imaizumi, FEM for springs, Springer, 2003 [CrossRef] [Google Scholar]
  20. E. Rodriguez, M. Paredes, M. Sartor, Analytical behavior law for a constant pitch conical compression spring, ASME J. Mech. Des. 129, 1352–1356 (2006) [CrossRef] [Google Scholar]
  21. M. Paredes, Analytical and experimental study of conical telescoping springs with nonconstant pitch, ASME J. Mech. Des. 135, 094502 (2013) [CrossRef] [Google Scholar]
  22. C. Dym, Consistent derivations of spring rates for helical springs, ASME J. Mech. Des. 131 (2009) [Google Scholar]
  23. European standards related to extension springs, 2002, EN 13906, ISSN 0335-3931 [Google Scholar]
  24. IST, 1980–2005, “Essential Spring Design Training Course, ” Handbook, The Institute of Spring Technology, Sheffield, United Kingdom. [Google Scholar]
  25. Stainless steel for mechanical springs, 2001, NF EN 10270-3, ISSN 0335-3931. [Google Scholar]
  26. M. Verotti, R. Crescenzi, M. Balucani, N. Belfiore, MEMS-based conjugate surfaces flexure hinge, ASME J. Mech. Des. 137, 012301 (2015) [CrossRef] [Google Scholar]
  27. F. Thiebaud, T. Ben Zineb, Experimental and finite element analysis of superelastic behaviour of shape memory alloy for damping applications, Mech. Ind. 15, 371–376 (2014) [CrossRef] [Google Scholar]
  28. G. Carpino, D. Accoto, F. Sergi, N.L. Tagliamonte, E. Guglielmelli, A novel compact torsional spring for series elastic actuators for assistive wearable robots, ASME J. Mech. Des. 134, 121002 (2012) [CrossRef] [Google Scholar]
  29. L.K. Koay, H. Gitani-Briggs, Design and optimization of mechanically resonant torsional spring mechanism for laser light dispersion applications, ASME J. Mech. Des. 133, 014504 (2011) [CrossRef] [Google Scholar]
  30. C. Vehar Jutte, S. Kota, Design of single, multiple, and scaled nonlinear springs for prescribed nonlinear responses, ASME J. Mech. Des. 132, 011003 (2010) [CrossRef] [Google Scholar]
  31. C. Vehar Jutte, S. Kota, Design of nonlinear springs for prescribed load-displacement functions, ASME J. Mech. Des. 130, 081403 (2008) [CrossRef] [Google Scholar]
  32. A. Hamza, S. Ayadi, E. Hadj-Taieb, Resonance phenomenon of strain waves in helical compression springs, Mech. Ind. 14, 253–265 (2013) [CrossRef] [Google Scholar]
  33. S. Ayadi, E. Hadj-Taieb, Influence des caractéristiques mécaniques sur la propagation des ondes de déformations linéaires dans les ressorts hélicoidaux, Mech. Ind. 7, 551–563 (2006) [Google Scholar]
  34. C.L. Dym, I.H. Shames, Solid Mechanics: A Variational Approach, McGraw-Hill, New York, 1973 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.