Open Access
Issue
Mechanics & Industry
Volume 21, Number 2, 2020
Article Number 206
Number of page(s) 11
DOI https://doi.org/10.1051/meca/2019056
Published online 07 February 2020
  1. E. Morse, J.-Y. Dantan, N. Anwer, R. Söderberg, G. Moroni, A. Qureshi, X. Jiang, L. Mathieu, Tolerancing: Managing uncertainty from conceptual design to final product, CIRP Ann. Manuf. Technol. 67, 695–717 (2018) [Google Scholar]
  2. ASME Y14.5-2009 Dimensioning and tolerancing. The American Society of Mechanical Engineers National Standard, New York, 2009 [Google Scholar]
  3. M. Zerelli, T. Soriano. Application of impulse differential inclusion for uncertainty analysis of mechatronic hybrid system, in: 9th France-Japan & 7th Europe-Asia Congress on Mechatronics (MECATRONICS)/13th Int'l Workshop on Research and Education in Mechatronics (REM), 2012 [Google Scholar]
  4. S. Ghosh, K. Roy, Parameter variation tolerance and error resiliency: New design paradigm for the nanoscale era, Proc. IEEE 98, 1718–1751 (2010) [CrossRef] [Google Scholar]
  5. J.P. Aubin, A. Cellina, Differential Inclusions, Set-Valued Maps And Viability Theory, Springer, Berlin, 1984 [CrossRef] [Google Scholar]
  6. T. Soriano, M. Zerelli, T.H. Gallois, A. Warniez, Quantifying reliability of a mechatronic system using Hausdorff distance in state space, in: 10th France-Japan/8th Europe-Asia Congress on Mechatronics, IEEE, 2014, pp. 47–52 [Google Scholar]
  7. M. Zerelli, Systèmes mécatroniques à paramètres variables : analyse du comportement et approche du tolérancement, PhD thesis, Ecole Centrale Paris, 2014 [Google Scholar]
  8. M. El Feki, Analyse et synthèse de tolérance pour la conception et le dimensionnement des systèmes mécatroniques, [Analysis and synthesis of tolerance for the design and sizing of mechatronic systems], thesis, Ecole Centrale Lyon. France, 2011 [Google Scholar]
  9. V.H. Nguyen, Synthèse de tolérance pour la conception des systèmes mécatroniques: Approche par bond graph inverse, [Tolerance synthesis for the mechatronic systems design: The approach of bond bond inverse], PhD thesis, National Institute of Applied Sciences of Lyon, France, 2014 [Google Scholar]
  10. M.K. Jabali, M. El Fahime, B. Rzine, M. Radouani, J. Louati, M. Haddar, Computer-aided dimensioning of multi-physics system design in a strategy: Application to a slider crank mechanism, Int. J. Res. Rev. Mechatron. Des. Simul. 1, 1 (2011) [Google Scholar]
  11. N. Jouilel, M. Radouani, M. El Gadari, E.F. Benaissa, Mechatronic tolerancing: Bond graph approach, Int. J. Adv. Comput. Technol. 5, 2063 (2016) [Google Scholar]
  12. V. Srinivasan, An integrated view of geometrical product specification and verification, the 7th CIRP International Seminar on Computer Aided-Tolerancing, New York, USA, 2001 [Google Scholar]
  13. J.Y. Choley, Une approche variationnelle de l'association des références en tolérancement géométrique, PhD thesis, Ecole Centrale Paris, France, 2005 [Google Scholar]
  14. J.Y. Choley, A. Riviere, Variation of the geometrical parameters for Datums association. Managing geometric uncertainty in the product lifecycle, the 8th CIRP International Seminar on Computer Aided-Tolerancing, Charlotte, North Carolina, USA, 2003 [Google Scholar]
  15. J.Y. Choley, A. Riviere, A. Clement, et al. A new variational association process for the verification of geometrical specifications, J. Comput. Inf. Sci. Eng. 7, 66–71 (2007) [Google Scholar]
  16. A.C. Pil, H.H. Asada, Integrated structure/control design of mechatronic systems using a recursive experimental optimization method, IEEE/ASME Trans. Mechatron. 1, 191–203 (1996) [CrossRef] [Google Scholar]
  17. H. Elmqvist, S. Mattsson, M. Otter, Modelica: The new object-oriented modeling language, in: The 12th European Simulation Multi-conference, Manchester, UK, 1998 [Google Scholar]
  18. M. Hammadi, J.Y. Choley, O. Penas, A. Riviere, Multidisciplinary approach for modelling and optimization of Road Electric Vehicles in conceptual design level, in: IEEE Electrical Systems for Aircraft, Railway and Ship Propulsion (ESARS), 2012, pp. 1–6 [Google Scholar]
  19. A. Guizani, M. Hammadi, J.Y. Choley, T. Soriano, M.S. Abbes, M. Haddar, Electric vehicle design, modelling and optimization. Mech. Ind. 17, 405 (2016) [CrossRef] [EDP Sciences] [Google Scholar]
  20. G. Hamza, M. Hammadi, M. Barkallah, J.-Y. Choley, A. Riviere, J. Louati, M. Haddar, Conceptual design methodology for the preliminary study of a mechatronic system: application to wind turbine system, Mech. Ind. 18, 413 (2017) [CrossRef] [EDP Sciences] [Google Scholar]
  21. H. Siala, F. Mhenni, J.-Y. Choley, M. Barkallah, J. Louati, M. Haddar, General tolerance for mechatronic system, in: IEEE International Systems Engineering Symposium (ISSE), 2017, pp. 1–4 [Google Scholar]
  22. H. Siala, F. Mhenni, J.-Y. Choley, M. Barkallah, J. Louati, M. Haddar, Parametric tolerance specification of an electromechanical actuator, 12th France-Japan and 10th Europe-Asia Congress on Mechatronics, September 10–12, 2018 [Google Scholar]
  23. S.R. Buss, Introduction to inverse kinematics with jacobian transpose, pseudoinverse and damped least squares methods, IEEE J. Robot. Autom. 17, 16 (2004) [Google Scholar]
  24. M-S. Jha, G. Dauphin-Tanguy, B. Ould-Bouamama, Robust fault detection with interval valued uncertainties in bond graph framework, Control Eng. Pract. 71, 61–78 (2018) [Google Scholar]
  25. M. Ferber, A. Korniienko, J. Löfberg, F. Morel, G. Scorletti, C. Vollaire, Efficient worst‐case analysis of electronic networks in intervals of frequency. Int. J. Numer. Model. Electron. Netw. Dev. Fields, 31, e2249 (2018) [CrossRef] [Google Scholar]
  26. G. Zhai, Y. Zhou, X. Ye, B. Hu, A method of multi-objective reliability tolerance design for electronic circuits, Chin. J. Aeronaut. 26, 161–170 (2013) [CrossRef] [Google Scholar]
  27. E.K. Boukas, Systèmes asservis, Presses inter Polytechnique, 1995, Montreal, p. 323 [Google Scholar]
  28. H. Trabelsi, P.A. Yvars, J. Louati, M. Haddar, Evaluation of the effectiveness of the interval computation method to simulate the dynamic behavior of subdefinite system: application on an active suspension system. Int. J. Interact. Des. Manuf. 9, 83–96 (2015) [CrossRef] [Google Scholar]
  29. A.H. Abdessalem, N. Aifaoui, A. Benamara, et al., Tolerance analyses and optimizations methodology in integrated design: TOL-ANALYSES. Mech. Ind. 9, 381–395 (2008) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.