Open Access
Mechanics & Industry
Volume 22, 2021
Article Number 30
Number of page(s) 17
Published online 20 April 2021
  1. ISO 6336:2006. Calculation of load capacity of spur and helical gears. [Google Scholar]
  2. K.W. Hall, H.H. Alvord, Progress reports on evaluation of Zytel and derlin as gears materials. Report, Engineering Research Institute, USA, 1968 [Google Scholar]
  3. E.A. Cornelius, I.W. Budich, Investigations of gears of acetal resins, J. Konstruktion 22, 103–116 (1970) [Google Scholar]
  4. H. Yelle, Design of thermoplastic gears with an involute tooth profile, Ph. D. Thesis, University of Waterloo, CA, 1977 [Google Scholar]
  5. M.H. Tsai, Y.C. Tsai, A method for calculating static transmission errors of plastic spur gears using FEM evaluation, J. Finite Elem. Anal. Des. 27, 345–357 (1997) [Google Scholar]
  6. H.G. Van Melick, Tooth-bending effects in plastic spur gears, J. Gear Technol. 24, 58–66 (2007) [Google Scholar]
  7. E. Letzelter, J.P. De Vaujany, M. Guingand, L. Chazeau, Quasi-static load sharing model in the case of Nylon 6/6 cylindrical gears, J. Mater. Des. 30, 4360–4368 (2009) [Google Scholar]
  8. K. Kobayashi, N. Tsukamoto, Formula for dynamic behaviors of tooth deflection and tooth root train in plastic gears, J. Theor. Appl. Mech. 49, 49–56 (2000) [Google Scholar]
  9. M. Karimpour, K.D. Dearn, D. Walton, A kinematic analysis of meshing polymer gear teeth, Proc. Inst. Mech. Eng. L 224, 101–115 (2010) [Google Scholar]
  10. E. Letzelter, J.P. Vaujany, M. Guingand, Load-sharing model for polymer cylindrical gears, J. Gear Technol. 28, 28–34 (2011) [Google Scholar]
  11. J. Cathelin, E. Letzelter, M. Guingand et al., Experimental and numerical study of a loaded cylindrical PA66 gear, J. Mech. Des. 135, 041007 (2013) [Google Scholar]
  12. S. Trobentar, S. Glodež, B. Zafošnik, Deflection analysis of spur polymer gear teeth, J. Multidiscipl. Eng. Sci. Technol. 2, 847–852 (2015) [Google Scholar]
  13. C. Hasl, H. Liu, P. Oster et al., Method for calculating the tooth root stress of plastic spur gears meshing with steel gears under consideration of deflection-induced load sharing, J. Mech. Mach. Theory 111, 152–163 (2017) [Google Scholar]
  14. S. Ramasamy, Tooth-bending effects in plastic spur gears influence on load sharing, stresses and wear, J. Sci. Eng. Res. 3, 192–199 (2012) [Google Scholar]
  15. V. Atanasiu, I. Doroftei, M.R. Iacob, D. Leohchi, Nonlinear dynamics of steel/plastic gears of servomechanism structures, J. Mater. Plastice 48, 98–103 (2011) [Google Scholar]
  16. T. Jabbour, G. Asmar, Tooth stress calculation of metal spur and helical gears, Mech. Mach. Theory 92, 375–390 (2015) [Google Scholar]
  17. A. Timoshenko, N.V. Baud, Strength of gear teeth, J. Mech. Eng. 48, 1–5 (1926) [Google Scholar]
  18. N.L. Pederson, M.F. Jørgensen, On gear tooth stiffness evaluation Niels Leergaard Pedersen, Martin Felix Jørgensen, Comput. Struct. 135, 109–117 (2014) [Google Scholar]
  19. Y. Yang, J. Wang, Q. Zhou, Y. Huang, J. Zhu, W. Yang, Mesh stiffness modeling considering actual tooth profile geometry for a spur gear pair, Mech. Ind. 19, 306 (2018) [Google Scholar]
  20. J. Hedlund, A. Lehtovaara, A parameterized numerical model for the evaluation of gear mesh stiffness variation of a helical gear pair, Proc. Inst. Mech. Eng. Part C 222, 1321–1327 (2008) [Google Scholar]
  21. R.W. Furrow, H.H. Mabie, The measurement of static deflection in spur gear teeth, J. Mech. 5, 147–150 (1970) [Google Scholar]
  22. N.G. Mcrum, C.P. Buckley, C.B. Bucknall, Principles of polymer engineering, Oxford Science Publications, Canada, 1990, 204 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.