Mechanics & Industry

An International Journal on Mechanical Sciences and Engineering Applications

Fully open access from January 2021.
Find out more including information on APCs.

Recent advances in vibrations, noise, and their use for machine monitoring

Open Access

Verifying hyperparameter sensitivities of optimal filter design methods for fault signature enhancement

Stephan Schmidt, Daniel N. Wilke, Philippus Stephan Heyns and Konstantinos C. Gryllias

Mechanics & Industry, 26 (2025) 22

Published online: 01 July 2025
Open Access

Identification of key parameter influence on efficiency of chain drive for track cycling − Preliminary results

Gabriel Lanaspeze, Martin Best, Berengere Guilbert, Jérôme Cavoret, Arnaud Duval, Lionel Manin and Fabrice Ville

Mechanics & Industry, 26 (2025) 21

Published online: 09 June 2025
Recent advances in vibrations, noise, and their use for machine monitoring

Open Access

Video-based operational modal analysis of slender mechanical structures with neutral axis estimation via barycenter calculation

Jimmy Touzet, Olivier Alata, Frédéric Bonnardot, Simon Chesné and Hugo André

Mechanics & Industry, 26 (2025) 20

Published online: 03 June 2025
Robotic Process Automation for Smarter Devices in Manufacturing

Open Access

Perspective projection measurement method for rolling vibration test bench of locomotives and vehicles

Qing Zhang and Biao Chen

Mechanics & Industry, 26 (2025) 19

Published online: 27 May 2025
Open Access

Reliability assessment of multistate wind turbine gear train system based on T-S fuzzy fault tree and Bayesian network

Xiaowei Yin, Bingbing Jiao, Jiushen Liu and Huiwen Hu

Mechanics & Industry, 26 (2025) 17

Published online: 24 April 2025
Open Access

Research on the motion trajectory control of industrial manipulators by the incremental PID control optimization algorithm

Jicai Wang and Fangyan Chen

Mechanics & Industry, 26 (2025) 18

Published online: 24 April 2025
Open Access

Development of an integrated engineering education model using multi-body closed system modeling, computational analysis, and signal processing analysis

Yonghu Park

Mechanics & Industry, 26 (2025) 16

Published online: 09 April 2025
Open Access

Influence of Electric Cylinder Transmission Characteristics on Servo System

Yang Lei, Yuanqing Xia and Yiyang Huo

Mechanics & Industry, 26 (2025) 15

Published online: 08 April 2025
Open Access

Bio-inspiration from the Issus Nymph gear − strength analysis

Bérengère Guilbert, Marie Winger, Jérôme Cavoret, Gregory Sutton, Richard Johnston and Fabrice Ville

Mechanics & Industry, 26 (2025) 14

Published online: 04 April 2025
Recent advances in vibrations, noise, and their use for machine monitoring

Open Access

A multiple improved envelope spectra via feature optimization gram (MIESFO-gram) for diagnosis of compound fault signatures

Mahsa Yazdanianasr, Alexandre Mauricio and Konstantinos Gryllias

Mechanics & Industry, 26 (2025) 12

Published online: 27 March 2025

Most read articles

157	Open Access Convergence analysis and mesh optimization of finite element analysis related to helical springs Guillaume Cadet and Manuel Paredes Mechanics & Industry, 25 (2024) 22 Published online: 29 July 2024
156	Open Access Wheel slip ratio regulation for investigating the vehicle's dynamic behavior during braking and steering input Ali Shahabi, Amir Hossein Kazemian, Said Farahat and Faramarz Sarhaddi Mechanics & Industry, 22 (2021) 17 Published online: 09 March 2021
151	Open Access Determining optimal suspension system parameters for spring fatigue life using design of experiment Yat Sheng Kong, Shahrum Abdullah, Dieter Schramm and Salvinder Singh Karam Singh Mechanics & Industry, 20 6 (2019) 621 Published online: 29 November 2019
106	Open Access An efficient and robust VUMAT implementation of elastoplastic constitutive laws in Abaqus/Explicit finite element code Lu Ming and Olivier Pantalé Mechanics & Industry, 19 3 (2018) 308 Published online: 12 September 2018
103	Open Access An efficient method for estimating the damping ratio of a vibration isolation system Qiang Yu, Dengfeng Xu, Yu Zhu and Gaofeng Guan Mechanics & Industry, 21 1 (2020) 103 Published online: 07 January 2020

Recent articles (published in the past 5 years)

30	Advances of junior researchers in aerospace sciences: a focus on innovative design Open Access THEA-CODE: a design tool for the conceptual design of hybrid-electric aircraft with conventional or unconventional airframe configurations Giuseppe Palaia, Davide Zanetti, Karim Abu Salem, Vittorio Cipolla and Vincenzo Binante Mechanics & Industry, 22 (2021) 19 Published online: 25 March 2021
27	Open Access An indicator of porosity through simulation of melt pool volume in aluminum wire arc additive manufacturing Nicolas Béraud, Akram Chergui, Maxime Limousin, François Villeneuve and Frédéric Vignat Mechanics & Industry, 23 (2022) 1 Published online: 20 January 2022
26	Open Access Prediction models for on-line cutting tool and machined surface condition monitoring during hard turning considering vibration signal Amlana Panda, Ashok Kumar Sahoo, Isham Panigrahi and Arun Kumar Rout Mechanics & Industry, 21 5 (2020) 520 Published online: 17 August 2020
26	Open Access Experimental investigation into characterization and machining of Al + SiCp nano-composites using coated carbide tool Pradyut Kumar Swain, Kasinath Das Mohapatra, Ratnakar Das, Ashok Kumar Sahoo and Amlana Panda Mechanics & Industry, 21 3 (2020) 307 Published online: 03 April 2020
26	Open Access Optimization of machining parameters in turning of Inconel 718 Nickel-base super alloy Wassila Frifita, Sahbi Ben Salem, Abdelkrim Haddad and Mohamed Athmane Yallese Mechanics & Industry, 21 2 (2020) 203 Published online: 05 February 2020

650	Open Access Determining optimal suspension system parameters for spring fatigue life using design of experiment Yat Sheng Kong, Shahrum Abdullah, Dieter Schramm and Salvinder Singh Karam Singh Mechanics & Industry, 20 6 (2019) 621 Published online: 29 November 2019
550	Open Access Convergence analysis and mesh optimization of finite element analysis related to helical springs Guillaume Cadet and Manuel Paredes Mechanics & Industry, 25 (2024) 22 Published online: 29 July 2024
493	Open Access Wheel slip ratio regulation for investigating the vehicle's dynamic behavior during braking and steering input Ali Shahabi, Amir Hossein Kazemian, Said Farahat and Faramarz Sarhaddi Mechanics & Industry, 22 (2021) 17 Published online: 09 March 2021
483	Open Access Design and anylysis of gamma type Stirling engine Davood Jalali Vahid and Hojjat Danandeh Oskouei Mechanics & Industry, 21 5 (2020) 511 Published online: 10 August 2020
442	Open Access An efficient method for estimating the damping ratio of a vibration isolation system Qiang Yu, Dengfeng Xu, Yu Zhu and Gaofeng Guan Mechanics & Industry, 21 1 (2020) 103 Published online: 07 January 2020

2413	Open Access Determining optimal suspension system parameters for spring fatigue life using design of experiment Yat Sheng Kong, Shahrum Abdullah, Dieter Schramm and Salvinder Singh Karam Singh Mechanics & Industry, 20 6 (2019) 621 Published online: 29 November 2019
1514	Open Access Convergence analysis and mesh optimization of finite element analysis related to helical springs Guillaume Cadet and Manuel Paredes Mechanics & Industry, 25 (2024) 22 Published online: 29 July 2024
1395	Open Access Preliminary design of centrifugal compressor using multidisciplinary optimization method Sun Shouyi, Yue Zhufeng, Li Lei, Zhang Mengchuang and Yang Weizhu Mechanics & Industry, 20 6 (2019) 628 Published online: 29 November 2019
1375	Open Access Design and anylysis of gamma type Stirling engine Davood Jalali Vahid and Hojjat Danandeh Oskouei Mechanics & Industry, 21 5 (2020) 511 Published online: 10 August 2020
1264	Open Access An efficient method for estimating the damping ratio of a vibration isolation system Qiang Yu, Dengfeng Xu, Yu Zhu and Gaofeng Guan Mechanics & Industry, 21 1 (2020) 103 Published online: 07 January 2020

Mechanics & Industry

Verifying hyperparameter sensitivities of optimal filter design methods for fault signature enhancement

Identification of key parameter influence on efficiency of chain drive for track cycling − Preliminary results

Video-based operational modal analysis of slender mechanical structures with neutral axis estimation via barycenter calculation

Perspective projection measurement method for rolling vibration test bench of locomotives and vehicles

Reliability assessment of multistate wind turbine gear train system based on T-S fuzzy fault tree and Bayesian network

Research on the motion trajectory control of industrial manipulators by the incremental PID control optimization algorithm

Development of an integrated engineering education model using multi-body closed system modeling, computational analysis, and signal processing analysis

Influence of Electric Cylinder Transmission Characteristics on Servo System

Bio-inspiration from the Issus Nymph gear − strength analysis

A multiple improved envelope spectra via feature optimization gram (MIESFO-gram) for diagnosis of compound fault signatures

Convergence analysis and mesh optimization of finite element analysis related to helical springs

Wheel slip ratio regulation for investigating the vehicle's dynamic behavior during braking and steering input

Determining optimal suspension system parameters for spring fatigue life using design of experiment

An efficient and robust VUMAT implementation of elastoplastic constitutive laws in Abaqus/Explicit finite element code

An efficient method for estimating the damping ratio of a vibration isolation system

Determining optimal suspension system parameters for spring fatigue life using design of experiment

Convergence analysis and mesh optimization of finite element analysis related to helical springs

Wheel slip ratio regulation for investigating the vehicle's dynamic behavior during braking and steering input

Design and anylysis of gamma type Stirling engine

An efficient method for estimating the damping ratio of a vibration isolation system

Determining optimal suspension system parameters for spring fatigue life using design of experiment

Convergence analysis and mesh optimization of finite element analysis related to helical springs

Preliminary design of centrifugal compressor using multidisciplinary optimization method

Design and anylysis of gamma type Stirling engine

An efficient method for estimating the damping ratio of a vibration isolation system

THEA-CODE: a design tool for the conceptual design of hybrid-electric aircraft with conventional or unconventional airframe configurations

An indicator of porosity through simulation of melt pool volume in aluminum wire arc additive manufacturing

Prediction models for on-line cutting tool and machined surface condition monitoring during hard turning considering vibration signal

Experimental investigation into characterization and machining of Al + SiCp nano-composites using coated carbide tool

Optimization of machining parameters in turning of Inconel 718 Nickel-base super alloy

2024 Impact Factor: 1.2
2024 5-Year Impact Factor: 1.2

News

Mechanics & Industry

Most read articles

2024 Impact Factor*: 1.2 2024 5-Year Impact Factor*: 1.2

News

2024 Impact Factor: 1.2
2024 5-Year Impact Factor: 1.2