Mechanics & Industry

Open Access

Thermal effect of the welding process on the dynamic behavior of the HSS constitutive materials of a fillet welded joint 301

J. Carrier, E. Markiewicz, G. Haugou, D. Lebaillif, N. Leconte and H. Naceur

Published online: 20 March 2017

DOI: https://doi.org/10.1051/meca/2016045

• Abstract
• PDF (1.311 MB)
• References

Open Access

Kinematics effect on honeycomb sandwich beams vibration 302

I. Chenini, R. Nasri, C. Mrad and Y. Abdelli

Published online: 20 March 2017

DOI: https://doi.org/10.1051/meca/2016039

• Abstract
• PDF (3.938 MB)
• References

Open Access

Research on the equivalent elastic modulus of mechanical joint interface 303

Linlin Zhang, Xiaoyang Li and Yanjun Zeng

Published online: 23 March 2017

DOI: https://doi.org/10.1051/meca/2016044

• Abstract
• PDF (1.319 MB)
• References

Open Access

Band gap formation in thin plates with a periodic array of resonators 304

Sahar Zouari, Jean-Michel Genevaux, Julien Brocail and Frédéric Ablitzer

Published online: 24 April 2017

DOI: https://doi.org/10.1051/meca/2016062

• Abstract
• PDF (2.242 MB)
• References

Open Access

LTD Stirling engine with regenerator. Numerical and experimental study 305

N. Martaj, R. Bennacer, L. Grosu, S. Savarese and A. Laaouatni

Published online: 24 April 2017

DOI: https://doi.org/10.1051/meca/2016023

• Abstract
• PDF (1.455 MB)
• References

Open Access

Clustering analysis in a mesoscopic model of a concrete-like material and its impact on dynamic fracture 306

S. Pierre and F. Gatuingt

Published online: 24 April 2017

DOI: https://doi.org/10.1051/meca/2016046

• Abstract
• PDF (4.378 MB)
• References

Open Access

Experimental and theoretical analysis of (water) permeability variation of nonwoven textiles subjected to compression 307

Petrica Turtoi, Traian Cicone and Aurelian Fatu

Published online: 22 May 2017

DOI: https://doi.org/10.1051/meca/2016048

• Abstract
• PDF (747.6 KB)
• References

Open Access

Simulation of the dynamic behavior of a rotor subject to base motion under variable rotational speed 308

Ryad Bouziani and Noureddine Ouelaa

Published online: 22 May 2017

DOI: https://doi.org/10.1051/meca/2016056

• Abstract
• PDF (1.889 MB)
• References

Open Access

Modelling and simulation of an harvester head mechanism 309

B. Hatton, V. Gagnol, B. C. Bouzgarrou, J.-C. Fauroux and G. Gogu

Published online: 22 May 2017

DOI: https://doi.org/10.1051/meca/2016055

• Abstract
• PDF (2.608 MB)
• References

Open Access

An improved 2D fem model for straight track corrugation using the mass redistribution method 310

Fangfang Duan, Cedric Pozzolini, Aurelien Saulot and Yves Berthier

Published online: 22 May 2017

DOI: https://doi.org/10.1051/meca/2016058

• Abstract
• PDF (1.673 MB)
• References

Open Access

Strain measurement and determining coefficient of plastic anisotropy using digital image correlation (DIC) 311

N. Hedayati, R. Madoliat and R. Hashemi

Published online: 24 May 2017

DOI: https://doi.org/10.1051/meca/2016060

• Abstract
• PDF (3.172 MB)
• References

Open Access

Wind effect on full-scale design of heliostat with torque tube 312

M. Mammar, S. Djouimaa, A. Hamidat, S. Bahria and M. El Ganaoui

Published online: 24 May 2017

DOI: https://doi.org/10.1051/meca/2016059

• Abstract
• PDF (1.663 MB)
• References

Open Access

An improved axisymmetric convected boundary element method formulation with uniform flow 313

Bassem Barhoumi

Published online: 24 May 2017

DOI: https://doi.org/10.1051/meca/2016064

• Abstract
• PDF (1.303 MB)
• References

Open Access

Electromagnetohydrodynamic (EMHD) peristaltic flow of solid particles in a third-grade fluid with heat transfer 314

M. M. Bhatti, A. Zeeshan and R. Ellahi

Published online: 24 May 2017

DOI: https://doi.org/10.1051/meca/2016061

• Abstract
• PDF (2.148 MB)
• References